Custom Hydraulic Hoses
in Odessa, TX
Fabricated on-site to your exact specs — walk in, walk out. Most hoses ready in 15–30 minutes.
A hydraulic hose blows on a dump truck, an oilfield pump, or a piece of heavy equipment, and the clock starts immediately. Every minute that machine is down costs money. At MEAPS 20 (Martin Equipments and Parts Sales) we fabricate custom hydraulic hoses in Odessa, TX on a professional crimping machine, on-site, to your exact specifications — no waiting on a distributor, no shipping delays.
Bring us the old hose (or measure it), we build the new one while you wait. Same-day, every day.
What We Fabricate
We crimp hydraulic hoses for the full range of heavy-duty applications working in the Permian Basin:
- Semi truck hydraulics — dump bodies, lift axles, sleeper systems, PTO-driven equipment
- Heavy equipment — excavators, loaders, dozers, skid steers, backhoes
- Oilfield equipment — frac pumps, swivels, pipe handling, BOP control lines, mud pumps
- Agricultural machinery — tractors, combines, balers, sprayers, augers
- Trailers & rollback equipment — wreckers, car haulers, tilt-deck trailers
- Industrial & shop hydraulics — presses, lifts, jacks
We work with 1-wire (R1AT/EN853-1SN) and 2-wire (R2AT/EN853-2SN) hose, plus 4-spiral and 6-spiral for high-pressure applications. Fittings: JIC, ORFS, NPT, BSP, SAE flange and metric — male, female, swivel, straight, 45° and 90°.
How It Works
Walk In With the Old Hose
Easiest path. We measure end-to-end, identify fittings, match hose grade and crimp the replacement on the spot. Most hoses done in 15–30 minutes.
Send Specs by Phone
Photo of the old hose + a tape measure alongside it = enough for us to build it. Call or WhatsApp (432) 803-0054 before you come in.
Schedule for Fleets
For shops or yards with multiple hoses to replace, we coordinate pickup, fabrication and return. Ask about recurring customer terms.
Why On-Site Fabrication Matters in the Permian Basin
There's no replacement for proximity when a hose fails. The nearest major industrial hydraulic supplier outside Odessa is in Midland or Lubbock — and even there, custom fabrication often means a 24–48 hour turnaround.
At MEAPS 20 you get:
- Same-day fabrication. Walk-in, walk-out. Most jobs under 30 minutes.
- Real crimping equipment. We use a professional hydraulic hose crimping machine, not a hand-crimper or sub-quality field tool.
- Hoses built to your spec. Length, fittings, working pressure, hose grade — built to match what your machine needs, not a "close enough" generic.
- Manufacturing defect warranty. If a hose we built fails from a manufacturing defect, we replace or repair it at no cost to you.
For genuine breakdowns where the truck or machine is parked, also see our emergency truck parts service — we open after hours for situations that can't wait until morning.
Common Applications We See Weekly
- Frac pump suction and discharge hoses
- Oilfield power tong control lines
- Dump truck PTO hoses
- Wrecker / rollback winch hoses
- Skid steer auxiliary hydraulic lines
- Lift gate / liftgate hoses
- Agricultural sprayer return lines
- Crane outrigger hoses
Frequently Asked Questions
How fast can you make a hydraulic hose?
Most hoses are crimped and ready in 15–30 minutes while you wait. Complex assemblies with multiple bends or unusual fittings may take longer — ask when you bring it in.
Do I need to bring the old hose?
It helps a lot, but no — if you can give us length, hose grade, working pressure, and both fitting types (with sizes), we can build it. A photo with a tape measure works well.
Do you fabricate high-pressure hoses for oilfield equipment?
Yes. We build 2-wire, 4-spiral and 6-spiral hose for high-pressure oilfield applications including frac pumps, mud pumps and pipe handling equipment.
What's your warranty on a custom-made hose?
Hydraulic hoses with a manufacturing defect are replaced or repaired at no cost. Damage from operator error, abrasion or improper installation is not covered (industry standard).
Can you build hoses for agricultural equipment?
Yes. Tractors, combines, balers, sprayers and augers — we do them regularly.
¿Hablan español?
Sí. Atendemos en inglés y en español. Pregunta por Partes Odessa Cubano.
Martin Equipments and Parts Sales (MEAPS 20)
9491 W University Blvd, Odessa, TX 79764
Serving Odessa, Midland, Pecos, Andrews, Big Spring, Monahans, Crane and the entire Permian Basin.
Call: (432) 803-0054 · Email: meaps20@gmail.com
Hydraulic line down?
Stop by today.
Walk-in fabrication · Same-day · Real crimping equipment · Manufacturing warranty.